I am using AT commands to communicate with modem connected to phone line.

Now target is to get data transmitted to the modem via phone line to my application.

I am using some AT command set for this.

Answering the call and dialing to another phone line is working ok but need data receiving and transmission functionality also.

Is there any resource or tutorial of some kind that shows some steps for this not just description of AT commands.

Will appreciate if anybody, who have worked on it or used some library of some kind, share his views.

Thanks
_________________
JB

[Joined: 23 Nov 2007]

I am using AT commands to communicate with modem connected to phone line.

Now target is to get data transmitted to the modem via phone line to my application.

I am using some AT command set for this.

Answering the call and dialing to another phone line is working ok but need data receiving and transmission functionality also.

Is there any resource or tutorial of some kind that shows some steps for this not just description of AT commands.

Will appreciate if anybody, who have worked on it or used some library of some kind, share his views.

Thanks
_________________
JB

[Posts: 3]

I am using AT commands to communicate with modem connected to phone line.

Now target is to get data transmitted to the modem via phone line to my application.

I am using some AT command set for this.

Answering the call and dialing to another phone line is working ok but need data receiving and transmission functionality also.

Is there any resource or tutorial of some kind that shows some steps for this not just description of AT commands.

Will appreciate if anybody, who have worked on it or used some library of some kind, share his views.

Thanks
_________________
JB

I am using AT commands to communicate with modem connected to phone line.

Now target is to get data transmitted to the modem via phone line to my application.

I am using some AT command set for this.

Answering the call and dialing to another phone line is working ok but need data receiving and transmission functionality also.

Is there any resource or tutorial of some kind that shows some steps for this not just description of AT commands.

Will appreciate if anybody, who have worked on it or used some library of some kind, share his views.

Thanks
_________________
JB

I'd love to help, but have only really dealt with the AT Command set in order to help connectivity and receive data from the previous connection.
_________________
Bradford Liedel
Webmaster - http://www.ModemHelp.Net

[Joined: 29 Jan 2001]

I'd love to help, but have only really dealt with the AT Command set in order to help connectivity and receive data from the previous connection.
_________________
Bradford Liedel
Webmaster - http://www.ModemHelp.Net

[Posts: 1424]

I'd love to help, but have only really dealt with the AT Command set in order to help connectivity and receive data from the previous connection.
_________________
Bradford Liedel
Webmaster - http://www.ModemHelp.Net

[Location: Howell, MI (USA)]

I'd love to help, but have only really dealt with the AT Command set in order to help connectivity and receive data from the previous connection.
_________________
Bradford Liedel
Webmaster - http://www.ModemHelp.Net